CLMHW - STAY-SILV WHITE BRAZING FLUX (SEE SUPPL)
- MSDS: CLMHW
- Manufacturer: J W HARRIS CO INC
- Product Name: STAY-SILV WHITE BRAZING FLUX (SEE SUPPL)
- National Stock Number: -
Product Identification
Product ID:STAY-SILV WHITE BRAZING FLUX (SEE SUPPL)
MSDS Date:04/01/1996
FSC:NIIN:Submitter:D DG
Status Code:A
MSDS Number: CLMHW
Responsible Party
CINCINNATI, OH 45242-4110
US
Emergency Phone: 800-424-9300
Info Phone: 513-891-2000
Cage: 27911
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
POTASSIUM TETRABORATE
CAS: 1332-77-0
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
POTASSIUM PENTABORATE
CAS: 11128-29-3
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
BORIC ACID (H3BO3)
CAS: 10043-35-3
RTECS: ED4550000
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
POTASSIUM BIFLUORIDE
CAS: 7789-29-9
RTECS: TS6650000
OSHA PEL 2.5 MG/M3
ACGIH TLV: 2.5 MG/M3
WATER
CAS: 7732-18-5
RTECS: ZC0110000
OSHA PEL NOT LISTED
ACGIH TLV: NOT LISTED
COPPER WETTING AGENT (CWA) (FOR STAY-SILV POWDERED FLUX
Hazards
LD50 LC50 Mixture:NO DATA PROVIDED BY MANUFACTURER
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALTION OF FUME. SKIN OR EYE CONTACT
IS ALSO POSSIBLE. FUMES ARE IRRITATING TO SKIN, EYES, AND THE
RESPIRATORY TRACT.
Explanation of Carcinogenicity:NO
Effects of Overexposure:INHALTION OF FUME. SKIN OR EYE CONTACT IS ALSO
POSSIBLE. FUMES ARE IRRITATING TO SKIN, EYES, AND THE RESPIRATORY
TRACT.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTIONS OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY FUME
IRRITANTS.
First Aid
First Aid:REMOVE FROM FUME EXPOSURE. IF BREATHING HAS STOPPED, PERFORM
ARTIFICIAL RESPIRATION. IF SWALLOWED, INDUCE VOMITING. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. FOR SKIN CONTACT, WASH
WITH W ATER. FOR EYE CONTACT, IMMEDIATELY FLUSH EYE FOR 15 MINUTES
WITH PLENTY OF WATER. GET MEDICAL AID IMMEDIATELY.
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:NON-FLAMMABLE.
Fire Fighting Procedures:OPEN FLAME AND SPARKS CAN IGNITE COMBUSTIBLES.
Unusual Fire/Explosion Hazard:SEE ANSI/ASC Z49.1-1983 SECTION 6.
Accidental Release
Spill Release Procedures:LARGE SPILLS SHOULD BE NEUTRALIZED WITH A
SLAKED LIME-SODA ASH SLURRY. FOLLOW FEDERAL, STATE AND LOCAL
REGULATIONS FOR DISPOSAL..
Neutralizing Agent:LARGE SPILLS SHOULD BE NEUTRALIZED WITH A SLAKED
LIME-SODA ASH SLURRY.
Handling
Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS AND PRECAUTIONARY LABEL ON THE PRODUCT. SEE AMERICAN
NATIONAL STANDARD Z49.1, SAFETY IN WELDING, CUTTING AND ALLIED
PROCESSES, PUBLISHED BY THE AMER ICAN WELDING SOCIETY, 550 N.W.
LEJEUNE, MIAMI, FL 33126 AND OSHA 29 CFR 1910.
Other Precautions:NO DATA PROVIDED BY MANUFACTURER
Exposure Controls
Respiratory Protection:USE RESPIRATORY FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN BRAZING IN THE FUMES. USE RESPIRABLE FUME
RESPIRATOR OR AN AIR SUPPLIED RESPIRATOR WHEN BRAZING IN CONFINED
SPACES OR WHERE LOCAL EXHAUS T OR VENTILATION DOES NOT KEEEP
EXPOSURE BELOW TLV.
Ventilation:LOCAL EXHAUST VENTILATION
Protective Gloves:WELDERS GLOVES
Eye Protection:SAFETY GLASSES, GOGGLES OR FACE SHIELD WITH FILTER LENS
Other Protective Equipment:WEAR HEAD AND BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM HEAT RADIATION, SPARKS, AND FLAMES. INCLUDES
WELDERS GLOVES, PROTECTIVE FACE SHIELD, AND MAY INCLUDE ARM
PROTECTORS, APRONS, HATS,
Work Hygienic Practices:NO DATA PROVIDED BY MANUFACTURER
Supplemental Safety and Health
THIS MSDS IS GOOD FOR STAY-SILV WHITE FLUX, GB 88, AUTO DISPENSE FLUX
AND DYNAFLOW FLUX. STAY-SILV BLACK FLUX, STAY-SILV #99 FLUX AND
STAY-SILV POWDERED FLUX.
Chemical Properties
HCC:N1
Boiling Pt:=100.C, 212.F
B.P. Text:760MMHG F
Spec Gravity:1.54 WHITE(1.66 BLACK)
Solubility in Water:MODERATE
Appearance and Odor:SMOOTH WHITE PASTES WITH NO ODOR
Stability
NO DATA PROVIDED BY MANUFACTURER
Stability Condition to Avoid:NO DATA PROVIDED BY MANUFACTURER
Hazardous Decomposition Products:BRAZING FUMES CANNOT BE CLASSIFIED
SIMPLY. THE FUME DECOMPOSITION PRODUCTS GENERATED MAY BE DIFFERENT
IN PER CENT AND FORM FROM THE LISTED INGREDIENTS.
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS FOR
DISPOSAL.
Toxicology
Toxicological Information:FLUXES ARE USED WITH BRAZING FILLER METALS.
WHEN MELTED, THESE FILLER METALS MAY PRODUCE FUMES THAT ARE
HAZARDOUS. FILLER METALS MAY CONTAIN CADMIUM. FUMES GENERATED
DURING BRAZING WITH CADMIUM ALLOYS MAY BE TOXIC. CONSULT THE
MATERIAL SAFETY DATA SHEETS THAT PERTAIN TO THESE PRODUCTS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ecology
Ecological:NO DATA PROVIDED BY MANUFACTURER
Transport
Transport Information:NON-REGULATED SUBSTANCE.
Regulatory
SARA Title III Information:INDIVIDUAL FLUXES COVERED BY THIS MSDS MAY
CONTAIN TOXIC CHEMICALS SUBJECT TO THE REPORTING REQUIREMENTS OF
SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW
ACT OF 1986 AND 40 CFR 372 .
Federal Regulatory Information:NO DATA PROVIDED BY MANUFACTURER
State Regulatory Information:NO DATA PROVIDED BY MANUFACTURER